I'm gonna do it for my nappy buds. - P2P-Zone

Nicobie · 04-04-06, 06:14 PM

As a going away jester for my old time BB I'd like to offer free carving on wood with the wood for free and only asking for postage.

No BS, It's simple enough.

Check out what can be done at www.carvewright.com Be sure to click the results page.

I'll send you the link to the software, U design what you want then email or snail mail me the files and I (my machine

) will carve it for you.

Don't sweat the wood as I have lots of exotic cut-offs.

USPS will ship a 8"x12"x1.5" for $3.85.

Bigger things like boxes might cost a bit more for shipping.

No guarantees other than you will get something.

This is only good for peeps who have been around longer than 2 weeks

This proggie will carve pictures, so if you want to have your boobs carved I'll give it a try.

NO DICKS though, I want my new CNC router to start out with good vibs. It's a masculine kind of machine.

89 db big...

I still check my PMs

JackSpratts · 04-04-06, 08:03 PM

i want you to carve one that says:

"brb,

nic"

- js.

goldie · 04-04-06, 11:06 PM

Quote:

Originally Posted by Nicobie

As a going away jester for my old time BB I'd like to offer free carving on wood with the wood for free and only asking for postage.

I still check my PMs

wow - i always wondered how stuff like that was done - have a hope chest i got for a wedding present years ago and it's completely covered with realy intricate carvings.....very kewl and very beautiful too.

Nicobie · 05-04-06, 06:22 PM

Quote:

Originally Posted by JackSpratts

i want you to carve one that says:

"brb,

nic"

- js.

PM sent

Nicobie · 05-04-06, 06:27 PM

Quote:

Originally Posted by goldie

wow - i always wondered how stuff like that was done - have a hope chest i got for a wedding present years ago and it's completely covered with realy intricate carvings.....very kewl and very beautiful too.

Check U're messages.

miss_silver · 07-04-06, 01:59 PM

Nic, i'm really interested

Dawn · 07-04-06, 03:22 PM

Nic, I've always wanted something that you created. Could you please make something special for me? I really don't have any ideas on what would be unique (which is why I haven't replied to this thread yet). I'm not creative like that anymore.

goldie · 08-04-06, 06:39 AM

i created something but am a bit worried that Nic will

hisself silly when he sees it.

i honestly felt like a kid with a crayon.........

Nicobie · 09-04-06, 06:24 PM

Quote:

Originally Posted by Dawn

I'm not creative like that anymore.

bullshit.

It's easy software. If u can do a greeting card, u can do this. I mean gif's can even be imported.

Send a pic of your husbands profile, anything you want.

However . . .

I'd like to make a nice (tasteful) carving of your boobs.

Just stand up straight, take a deep breath and have hubbie take the pic.

Just import it into the software. Nobody will be able to see your face if you don't want.

I do have some exotic woods that U can chose from. I bet them 2doggies would look good in teak or purpleheart.

For you perverts reading this thread, don't get all excited. twodog and I go way back. I flamed the broad bad on her first post. We quit the cigs at about the same time. We kinda get along and have had fun with each other. (3000 miles apart).

If it wasn't for dem damn 'smilies', who knows

Nicobie · 09-04-06, 06:42 PM

Quote:

Originally Posted by JackSpratts

i want you to carve one that says:

"brb,

nic"

- js.

hehe

email me the results to nicobie@yahoo.com

software can be found at, http://www.carvewright.com/update.php?major=1&minor=025

Download the demo version of the software. It works fine.

This really works

Nicobie · 09-04-06, 06:51 PM

Quote:

Originally Posted by goldie

i created something but am a bit worried that Nic will

hisself silly when he sees it.

i honestly felt like a kid with a crayon.........

Hey goldie,

It looks good to me. Should carve fine.

Dawn · 11-04-06, 06:25 AM

Ok then Nic. I'll check that software this weekend when I have some time.

goldie · 12-04-06, 01:27 AM

Quote:

Originally Posted by Dawn

Ok then Nic. I'll check that software this weekend when I have some time.

theknife · 13-04-06, 07:20 PM

ok, i'm confused on how to do this...i downloaded the program, imported a file, adjusted it a little bit, and saved it, thinking this is what Nic needs to work with...but the saved image has to be loaded onto a flash card - it doesn't appear to be a stand-alone file one could send to somebody. anybody else do this and can tell me what i'm missing? or maybe i just don't know where to look for the file?

goldie · 13-04-06, 09:26 PM

Quote:

Originally Posted by theknife

ok, i'm confused on how to do this...i downloaded the program, imported a file, adjusted it a little bit, and saved it, thinking this is what Nic needs to work with...but the saved image has to be loaded onto a flash card - it doesn't appear to be a stand-alone file one could send to somebody. anybody else do this and can tell me what i'm missing? or maybe i just don't know where to look for the file?

i imported images also but when i saved the image, it was part of the program.
i saved my finished project to an .mpc file (save as name.mpc) on my disk it was about 308KB, then emailed it as an attachment.

i never saw anything about a flash card. hopefully Nic'll stop in to help.

theknife · 14-04-06, 04:53 AM

Quote:

Originally Posted by goldie

i imported images also but when i saved the image, it was part of the program.
i saved my finished project to an .mpc file (save as name.mpc) on my disk it was about 308KB, then emailed it as an attachment.

i never saw anything about a flash card. hopefully Nic'll stop in to help.

i'll try it again tonight - thanks Goldie

nic wanted to do my breasts too, but i told him wasn't that kind of guy

Nicobie · 14-04-06, 05:14 PM

Quote:

Originally Posted by goldie

i imported images also but when i saved the image, it was part of the program.
i saved my finished project to an .mpc file (save as name.mpc) on my disk it was about 308KB, then emailed it as an attachment.

i never saw anything about a flash card. hopefully Nic'll stop in to help.

goldie...

What ever U did worked. Maybe u can help knife. I have to go again tonight but should be back by monday.

Nicobie · 14-04-06, 05:18 PM

Quote:

Originally Posted by Dawn

Ok then Nic. I'll check that software this weekend when I have some time.

:big smile:

Nicobie · 16-04-06, 06:48 PM

Quote:

Originally Posted by Dawn

Ok then Nic. I'll check that software this weekend when I have some time.

It's Sunday and soon it will be 6:66

Dust off them devil horns, poke u're old man in in the arse,

and get with the program.

Nicobie · 22-04-06, 07:32 PM

I'm finally back in the shop.

give me a couple days.

04-04-06, 06:14 PM	#1
Nicobie Registered User Join Date: Mar 2000 Posts: 5,522	I'm gonna do it for my nappy buds. As a going away jester for my old time BB I'd like to offer free carving on wood with the wood for free and only asking for postage. No BS, It's simple enough. Check out what can be done at www.carvewright.com Be sure to click the results page. I'll send you the link to the software, U design what you want then email or snail mail me the files and I (my machine ) will carve it for you. Don't sweat the wood as I have lots of exotic cut-offs. USPS will ship a 8"x12"x1.5" for $3.85. Bigger things like boxes might cost a bit more for shipping. No guarantees other than you will get something. This is only good for peeps who have been around longer than 2 weeks This proggie will carve pictures, so if you want to have your boobs carved I'll give it a try. NO DICKS though, I want my new CNC router to start out with good vibs. It's a masculine kind of machine. 89 db big... I still check my PMs Last edited by Nicobie : 04-04-06 at 06:24 PM.

07-04-06, 03:22 PM	#7
Dawn R.I.P napho 1-31-16 Join Date: Dec 2000 Location: Venus Posts: 16,723	Nic, I've always wanted something that you created. Could you please make something special for me? I really don't have any ideas on what would be unique (which is why I haven't replied to this thread yet). I'm not creative like that anymore. __________________ I love you napho and I will weep forever..........

11-04-06, 06:25 AM	#12
Dawn R.I.P napho 1-31-16 Join Date: Dec 2000 Location: Venus Posts: 16,723	Ok then Nic. I'll check that software this weekend when I have some time. __________________ I love you napho and I will weep forever..........

22-04-06, 07:32 PM	#20
Nicobie Registered User Join Date: Mar 2000 Posts: 5,522	goldie I'm finally back in the shop. give me a couple days.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-04-06, 08:03 PM	#2
JackSpratts Join Date: May 2001 Location: New England Posts: 9,959	i want you to carve one that says: "brb, nic" - js.

07-04-06, 01:59 PM	#6
miss_silver Keebeck Canuck Join Date: Jun 2000 Location: Close to a border of LUNATICS Posts: 1,771	Nic, i'm really interested

08-04-06, 06:39 AM	#8
goldie yea, it's me. Join Date: Jan 2002 Location: usa Posts: 2,093	i created something but am a bit worried that Nic will hisself silly when he sees it. i honestly felt like a kid with a crayon.........

13-04-06, 07:20 PM	#14
theknife my name is Ranking Fullstop Join Date: Dec 2001 Location: Promontorium Tremendum Posts: 4,391	ok, i'm confused on how to do this...i downloaded the program, imported a file, adjusted it a little bit, and saved it, thinking this is what Nic needs to work with...but the saved image has to be loaded onto a flash card - it doesn't appear to be a stand-alone file one could send to somebody. anybody else do this and can tell me what i'm missing? or maybe i just don't know where to look for the file?