just tried reconnecting with my other key..
like i had to set it up from scratch
in a new profile...(waste prefrences>profiles>profile manager)
it takes a while to get in there just leave it connect for a while and come back and check on it..every 5 mins or so..but make sure you have every thing set up in preferences...
if you are on a LAN
in(->msinfo32 in the run box) go to
components>network>adapter
that will have
your LAN IPadress
if you are being assigned one by a DHCP
or if you know already
then in waste prefrences>network>ip adresses
put your machines LAN ip in the force incoming ip to: field
i have use access control list checked
with one ip
0.0.0.0/0
in waste prefrences>network>
network name /ID
napsterites <----for eg.(network doesnt exist)
case sensitive ,dont leave a space after it..
(this seems to catch a few ppl out so beware!)
note:there is a noname network..kicking about if you can find it..
i have route traffic checked both when i used dial up and DSL
i have in the listen port section both checked
everything else in preferences ihave left at default...
try as many ppls ips that you know of that are connected.. ..that seemed to help
u can try peoples domain names was well if they have one..
as well as any ips that you have..
in network status
you only need one person to authorise but get as many keys of the people connected to the network as you can
hope that helps any one trying to connect....