P2P-Zone

P2P-Zone (http://www.p2p-zone.com/underground/index.php)
-   Swap Shop (http://www.p2p-zone.com/underground/forumdisplay.php?f=26)
-   -   I'm gonna do it for my nappy buds. (http://www.p2p-zone.com/underground/showthread.php?t=22575)

Nicobie 04-04-06 06:14 PM

I'm gonna do it for my nappy buds.
 
As a going away jester for my old time BB I'd like to offer free carving on wood with the wood for free and only asking for postage.

No BS, It's simple enough.

Check out what can be done at www.carvewright.com Be sure to click the results page.

I'll send you the link to the software, U design what you want then email or snail mail me the files and I (my machine :bdance: ) will carve it for you.

Don't sweat the wood as I have lots of exotic cut-offs.

USPS will ship a 8"x12"x1.5" for $3.85.

Bigger things like boxes might cost a bit more for shipping.

No guarantees other than you will get something.

This is only good for peeps who have been around longer than 2 weeks


This proggie will carve pictures, so if you want to have your boobs carved I'll give it a try.

NO DICKS though, I want my new CNC router to start out with good vibs. It's a masculine kind of machine.

89 db big...



I still check my PMs

JackSpratts 04-04-06 08:03 PM

i want you to carve one that says:

"brb,

nic"


- js.

goldie 04-04-06 11:06 PM

Quote:

Originally Posted by Nicobie
As a going away jester for my old time BB I'd like to offer free carving on wood with the wood for free and only asking for postage.

I still check my PMs


wow - i always wondered how stuff like that was done - have a hope chest i got for a wedding present years ago and it's completely covered with realy intricate carvings.....very kewl and very beautiful too.

Nicobie 05-04-06 06:22 PM

Quote:

Originally Posted by JackSpratts
i want you to carve one that says:

"brb,

nic"


- js.


PM sent

Nicobie 05-04-06 06:27 PM

Quote:

Originally Posted by goldie
wow - i always wondered how stuff like that was done - have a hope chest i got for a wedding present years ago and it's completely covered with realy intricate carvings.....very kewl and very beautiful too.

Check U're messages.

miss_silver 07-04-06 01:59 PM

Nic, i'm really interested :ND:

Dawn 07-04-06 03:22 PM

Nic, I've always wanted something that you created. Could you please make something special for me? I really don't have any ideas on what would be unique (which is why I haven't replied to this thread yet). I'm not creative like that anymore.

goldie 08-04-06 06:39 AM

i created something but am a bit worried that Nic will :BL: :BL: :BL: hisself silly when he sees it.

i honestly felt like a kid with a crayon......... :B:

Nicobie 09-04-06 06:24 PM

:love:
Quote:

Originally Posted by Dawn
I'm not creative like that anymore.

bullshit.

It's easy software. If u can do a greeting card, u can do this. I mean gif's can even be imported.

Send a pic of your husbands profile, anything you want.

However . . .

I'd like to make a nice (tasteful) carving of your boobs.

Just stand up straight, take a deep breath and have hubbie take the pic.

Just import it into the software. Nobody will be able to see your face if you don't want.

I do have some exotic woods that U can chose from. I bet them 2doggies would look good in teak or purpleheart. :love: :love:

:)









For you perverts reading this thread, don't get all excited. twodog and I go way back. I flamed the broad bad on her first post. We quit the cigs at about the same time. We kinda get along and have had fun with each other. (3000 miles apart).

If it wasn't for dem damn 'smilies', who knows :uzi:

Nicobie 09-04-06 06:42 PM

Quote:

Originally Posted by JackSpratts
i want you to carve one that says:

"brb,

nic"


- js.

hehe

email me the results to nicobie@yahoo.com


software can be found at, http://www.carvewright.com/update.php?major=1&minor=025



Download the demo version of the software. It works fine.


This really works :)

Nicobie 09-04-06 06:51 PM

Quote:

Originally Posted by goldie
i created something but am a bit worried that Nic will :BL: :BL: :BL: hisself silly when he sees it.

i honestly felt like a kid with a crayon......... :B:

Hey goldie,

It looks good to me. Should carve fine.

Dawn 11-04-06 06:25 AM

Ok then Nic. I'll check that software this weekend when I have some time. :)

goldie 12-04-06 01:27 AM

Quote:

Originally Posted by Dawn
Ok then Nic. I'll check that software this weekend when I have some time. :)


:AP: :AP: :AP: :cheer: :AP: :AP: :AP:

theknife 13-04-06 07:20 PM

ok, i'm confused on how to do this...i downloaded the program, imported a file, adjusted it a little bit, and saved it, thinking this is what Nic needs to work with...but the saved image has to be loaded onto a flash card - it doesn't appear to be a stand-alone file one could send to somebody. anybody else do this and can tell me what i'm missing? or maybe i just don't know where to look for the file?

goldie 13-04-06 09:26 PM

Quote:

Originally Posted by theknife
ok, i'm confused on how to do this...i downloaded the program, imported a file, adjusted it a little bit, and saved it, thinking this is what Nic needs to work with...but the saved image has to be loaded onto a flash card - it doesn't appear to be a stand-alone file one could send to somebody. anybody else do this and can tell me what i'm missing? or maybe i just don't know where to look for the file?

i imported images also but when i saved the image, it was part of the program.
i saved my finished project to an .mpc file (save as name.mpc) on my disk it was about 308KB, then emailed it as an attachment.

i never saw anything about a flash card. hopefully Nic'll stop in to help.

theknife 14-04-06 04:53 AM

Quote:

Originally Posted by goldie
i imported images also but when i saved the image, it was part of the program.
i saved my finished project to an .mpc file (save as name.mpc) on my disk it was about 308KB, then emailed it as an attachment.

i never saw anything about a flash card. hopefully Nic'll stop in to help.

i'll try it again tonight - thanks Goldie :W:

nic wanted to do my breasts too, but i told him wasn't that kind of guy :CG:

Nicobie 14-04-06 05:14 PM

Quote:

Originally Posted by goldie
i imported images also but when i saved the image, it was part of the program.
i saved my finished project to an .mpc file (save as name.mpc) on my disk it was about 308KB, then emailed it as an attachment.

i never saw anything about a flash card. hopefully Nic'll stop in to help.


goldie...

What ever U did worked. Maybe u can help knife. I have to go again tonight but should be back by monday.

Nicobie 14-04-06 05:18 PM

u better
 
Quote:

Originally Posted by Dawn
Ok then Nic. I'll check that software this weekend when I have some time. :)

:big smile:

Nicobie 16-04-06 06:48 PM

Quote:

Originally Posted by Dawn
Ok then Nic. I'll check that software this weekend when I have some time. :)


It's Sunday and soon it will be 6:66

Dust off them devil horns, poke u're old man in in the arse,

and get with the program.

:ghug:

Nicobie 22-04-06 07:32 PM

goldie
 
I'm finally back in the shop.

give me a couple days.

:)


All times are GMT -6. The time now is 05:51 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© www.p2p-zone.com - Napsterites - 2000 - 2024 (Contact grm1@iinet.net.au for all admin enquiries)